Biostar A960G Bios Setup - Page 28
CPU/HT Reference Clock MHz, Custom P-States, Core FID, Core DID, Core VID, NB FID, HT Link Speed, HT - am3
View all Biostar A960G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
A960G+ / A960GL+ BIOS Manual CPU/HT Reference Clock (MHz) This item allows BIOS to select CPU Over Clock. Options: 200 (Default) / 200~600 Custom P-States This item tells BIOS whether to use the setup options below this to configure the P-States, or whether to configure the P-States automatically. Options: Disabled (Default) / Enabled Core FID This item allows you to select the Ratio/Frequency of AM3 CPU. Options: x8.0 1600MHz ~ x131.5 6300MHz (Differed by CPU) Core DID Options: Divided by 1 (Default) / Divided by 2 / Divided by 4 / Divided by 8 / Divided by 16 Core VID This function allows you to adjust the voltage of AM3 CPU. NB FID This item allows you to select the Frequency of NB chip. Options: 800MHz ~ 7000MHz (Differed by CPU) HT Link Speed The HyperTransport link will run at this speed if it is slower than or equal to the system clock and the board is capable. Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz / 1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz / 2.2GHz / 2.4GHz / 2.6GHz /2.8GHz /3.0GHz HT Link Width The HyperTransport link will run at this width. Options: Auto (Default) / 8 Bit / 16 Bit 27