Biostar G31-M7 Bios Setup - Page 32
Biostar G31-M7 Manual
View all Biostar G31-M7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
G31-M7/P31-A7 IRQ Resources This submenu will allow you to assign each system interrupt a type, depending on the type of device using the interrupt. When you press the "Press Enter" tag, you will be directed to a submenu that will allow you to configure the system interrupts. This is only configurable when "Resources Controlled By" is set to "Manual". IRQ-3 assigned to PCI Device IRQ-4 assigned to PCI Device IRQ-5 assigned to PCI Device IRQ-7 assigned to PCI Device IRQ-9 assigned to PCI Device IRQ-10 assigned to PCI Device IRQ-11 assigned to PCI Device IRQ-12 assigned to PCI Device IRQ-14 assigned to PCI Device IRQ-15 assigned to PCI Device PCI / VGA Palette Snoop Some old graphic controllers need to "snoop" on the VGA palette and then map it to their display as a way to provide boot information and VGA compatibility. This item allows such snooping to take place. The Choices: Disabled (default), Enabled INT Pin 1/2/3/4/5/6/7/8 Assignment The Choices: Auto (default), 3/4/5/7/9/10/11/12/14/15. Maximum Payload Size Set maximum TLP payload size for the PCI Express device.The unit is byte . The Choice: 4096 (default.), 128, 256, 512, 1024, 2048. 31