Biostar GEFORCE 6100-M9 BIOS SETUP MANUAL - Page 16

NB<->SB HT Width - m9 manual

Get Biostar GEFORCE 6100-M9 PDF manuals and user guides View all Biostar GEFORCE 6100-M9 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

GeForce 6100-M9 K8NB HT Width The Choices:↓16 ↑16 (default), ↓8 ↑8. NBSB HT Width The Choices: ↓8 ↑8 (default), ↓16 ↑16. Err94 Enh This item allows you to enable/disable the "sequential Prufetch Feature" of K8 CPU. The Choices: Auto (default), Disable. Onboard GPU The Choices: Auto (default), Always Enable. DRAM Configuration Timing Mode The Choices: Auto (default), Manual. Memclock index value The Choices: 200MHz (default). CAS# Latency This field specify the cas# latency, i.e. cas# to read data valid. The Choices: CL=2.5 (default), CL=3.0, CL=2.0 Min RAS# active time (tRAS) This field specifies the minimum RAS# active time. Typically -45-60 Nsec. The Choices: 8T (default). RAS# to CAS# Delay (tRCD) This field specifies the RAS# to CAS# Delay to read/ write command to the same bank. Typically -20 Nsec. The Choices: 4T (default). 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
GeForce 6100-M9
15
K8<->NB HT Width
The Choices:
↓1
6
↑1
6
(default),
↓
8
↑
8.
NB<->SB HT Width
The Choices:
↓
8
↑
8
(default),
↓1
6
↑1
6.
Err94 Enh
This item allows you to enable/disable the “sequential Prufetch Feature” of K8 CPU.
The Choices: Auto
(default), Disable.
Onboard GPU
The Choices
:
Auto
(default), Always Enable.
DRAM Configuration
Timing Mode
The Choices: Auto
(default), Manual.
Memclock index value<MHz>
The Choices: 200MHz
(default).
CAS# Latency
This field specify the cas# latency, i.e. cas# to read data valid.
The Choices: CL=2.5
(default), CL=3.0, CL=2.0
Min RAS# active time (tRAS)
This field specifies the minimum RAS# active time. Typically -45-60 Nsec.
The Choices: 8T
(default).
RAS# to CAS# Delay (tRCD)
This field specifies the RAS# to CAS# Delay to read/ write command to the same
bank. Typically -20 Nsec.
The Choices: 4T
(default).