Biostar GF7025-M2 Setup Manual - Page 82
HPET Support, POWER ON Function, KB Power ON Password, Hot Key Power ON, PWRON After PWR-Fail
![]() |
View all Biostar GF7025-M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
GF7025-M2 Date (of Month) Alarm You can choose which month the system will boot up. Time (hh:mm:ss) Alarm You can choose the system boot up time, input hour, minute and second to spec ify. Note: If you have change the setting, you must let the system boot up until it goes to the operating system, before this function will work. HPET Support This option allows you to disabled or enables the High Precision Event Timer. The Choices: Enabled (default), Disabled. POWER ON Function` This item allows you to choose the power on method. The Choices: Button Only(default), Password, Hot Key, Mouse Move, Mouse Click, Any Key, Keyboard 98. KB Power ON Password Input password and press Enter to set the Keyboard power on password. Hot Key Power ON Choose the Hot Key combination to boot up the system. The Choices: Ctrl-F1(default), Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5, Ctrl-F6, Ctrl-F7, Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, and Ctrl-F12. PWRON After PWR-Fail This setting specifies how your system should behave after a power fail or interrupts occurs. By choosing off will leave the computer in the power off state. Choosing On will reboot the computer. Former-Sts will restore the system to the status before power failure or interrupt occurs. The Choices: Off (default), On, Former-Sts. 28
![](/manual_guide/products/biostar-gf7025m2-setup-manual-d33d2c5/82.png)