Biostar GF8100M2TE Setup Manual - Page 11
B. Memory Capacity, C. Dual Channel Memory installation
![]() |
View all Biostar GF8100M2TE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
B. Memory Capacity GF8100 M2+ TE DIMM Socket Location DDR2 Module Total Memory Size DIMMA1 DIMMB1 256MB/512MB/1GB/2GB/4GB Max is 8GB. 256MB/512MB/1GB/2GB/4GB C. Dual Channel Memory installation To trigger the Dual Channel function of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pairs, shown in the following table. Dual Channel Status DIMMA1 DIMMB1 Disabled O X Disabled X O Enabled O O (O means memory installed, X means memory not installed.) The DRAM bus width of the memory module must be the same (x8 or x16) 9
![](/manual_guide/products/biostar-gf8100m2te-setup-manual-543589a/11.png)
GF8100 M2+ TE
9
B. Memory Capacity
DIMM Socket
Location
DDR2 Module
Total Memory
Size
DIMMA1
256MB/512MB/1GB/2GB/4GB
DIMMB1
256MB/512MB/1GB/2GB/4GB
Max is 8GB.
C. Dual Channel Memory installation
To trigger the Dual Channel function of the motherboard, the memory module
must meet the following requirements:
Install memory module of the same density in pairs, shown in the following
table.
Dual Channel Status
DIMMA1
DIMMB1
Disabled
O
X
Disabled
X
O
Enabled
O
O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)