Biostar I915P-A7 I915P-A7 user's manual - Page 10
Hardware Installation
View all Biostar I915P-A7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
I915P-A7 CHAPTER 2: HARDWARE INSTALLATION 2.1 CENTRAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won't be damaged. Pin Cap Step 1: Pull the lever sideways away from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the black cut edge on socket, and the white dot on CPU should point wards this black cut edge. The CPU will fit only in the correct orientation. Step 2-1: 10
I915P-A7
CHAPTER 2: HARDWARE INSTALLATION
2.1
C
ENTRAL
P
ROCESSING
U
NIT
(CPU)
Special Notice:
Remove Pin Cap before installation, and make
good preservation for future use. When the CPU
is removed, cover the Pin Cap on the empty
socket to ensure pin legs won’t be damaged.
Pin Cap
Step 1:
Pull the lever sideways away from the socket and then raise the
lever up to a 90-degree angle.
Step 2:
Look for the black cut edge on socket, and the white dot on CPU
should point wards this black cut edge. The CPU will fit only in the
correct orientation.
Step 2-1:
10