Biostar IDEQ 200P iDEQ 200P BIOS setup guide. - Page 29
Frequency Control
View all Biostar IDEQ 200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
9 Frequency Control Figure 9. Frequency Control CPU Voltage This item allows you to select CPU Voltage Control. The Choices: Default (default), +1.7%, +3.4%, +5.1%. DDR Voltage This item allows you to select DDR Voltage Control. The Choices: Default (Default), 2.75V, 2.85V, 2.90V. If unfortunately, the system's frequency that you are selected is not functioning, there are two methods of booting-up the system. Method 1: Clear the CMOS data by setting the JCMOS1 ((2-3) closed)) as "ON" status. All the CMOS data will be loaded as defaults setting. Method 2: Press the key and Power button simultaneously, after that keep-on pressing the key until the power-on screen showed. This action will boot-up the system according to FSB of the processor. 28