Biostar K8M800MAM2 K8M800 MICRO AM2 bios guide - Page 22
LDT & PCI Bus Control
View all Biostar K8M800MAM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
K8M800 Micro AM2 BIOS Setup LDT & PCI Bus Control If you highlight the literal "Press Enter" next to the "LDT & PCI Bus Control" label and then press the enter key, it will take you a submenu with the following options : Figure 4.3: LDT & PCI Bus Control Upstream LDT Bus Width The Choices: 8 bit, 16 bit (default). Downstream LDT Bus Width The Choices: 8 bit, 16 bit (default). LDT Bus Frequency The Choices: 800MHz (default)., Auto, 600MHz, 400MHz, 200MHz. PCI1 Master 0 WS Write When enabled, writes to the PCI bus are executed with zero-wait states. The Choices: Enabled (default), Disabled. PCI2 Master 0 WS Write When enabled, writes to the PCI bus are executed with zero-wait states. The Choices: Enabled (default), Disabled. 21
K8M800 Micro AM2 BIOS Setup
21
LDT & PCI Bus Control
If you highlight the literal “Press Enter” next to the “LDT & PCI Bus Control” label and then
press the enter key, it will take you a submenu with the following options
: Figure 4.3:
LDT & PCI Bus Control
Upstream LDT Bus Width
The Choices:
8 bit,
16 bit
(default).
Downstream LDT Bus Width
The Choices:
8 bit,
16 bit
(default).
LDT Bus Frequency
The Choices:
800MHz
(default).
, Auto, 600MHz, 400MHz, 200MHz.
PCI1 Master 0 WS Write
When enabled, writes to the PCI bus are executed with zero-wait states.
The Choices:
Enabled
(default), Disabled.
PCI2 Master 0 WS Write
When enabled, writes to the PCI bus are executed with zero-wait states.
The Choices:
Enabled
(default), Disabled.