Biostar M6VCF M6VCF user's manual - Page 76
Trouble Shooting
View all Biostar M6VCF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 4 4. Trouble Shooting Trouble Shooting Power cable is unplugged. Visually inspect power cable Make sure power cable is securely plugged in. Defective power cable. Visually inspect the cable, Replace cable. try another cable. Power supply failure. Power cable and wall Contact technical support. socket are OK, but system is still dead. Faulty wall outlet; circuit Breaker or fuse blown. Plug in device known to work in socket and test. Use different socket, repair outlet, reset circuit breaker or replace fuse. Memory DIMM is partially Turn off computer. Take Using even pressure on dislodged from the slot on cover off system unit. both ends of the DIMM, the motherboard. Check the DIMM to press down firmly until the ensure it is securely module snaps into place. seated in the slot. 4-1