Biostar M6VLR M6VLR compatibility test report - Page 9
Power Management Setup, Pnp / Pci Configuration
View all Biostar M6VLR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
POWER MANAGEMENT SETUP ACPI Function Enabled Pass Power Management Press Enter Pass Power Management User Define Pass HDD Power Down Disable Pass Doze Mode Disable Pass Suspend Mode Disable Pass ACPI Suspend Type S1(POS) Pass PM Control by APM Yes Pass Video Off Option Suspend Æ off Pass Video Off Method V/H SYNC+ Blank Pass Modem Use IRQ 3 Pass Soft-off by PWR-BTN Instant-off Pass State After Power Failure Off Pass Wake Up Event Press Enter Pass VGA OFF Pass LPT & COM LPT/COM Pass HDD & FDD ON Pass PCI & Master OFF Pass PowerOn by PCI Card Disabled Pass Wake Up On LAN/ Ring Disabled Pass RTC Alarm Resume Disabled Pass X Date(of Month) 0 Pass X Resume Time(hh:mm:ss) 0 0 0 Pass Primary INTR ON Pass IRQs Activity Monitoring Press Enter Pass IRQ3 (COM 2) Enabled Pass IRQ4 (COM 1) Enabled Pass IRQ5 (LPT 2) Enabled Pass IRQ6 (Floppy Disk) Enabled Pass IRQ7 (LPT1) Enabled Pass IRQ8 (RTC Alarm) Disabled Pass IRQ9 (IRQ2 Redir) Disabled Pass IRQ10 (Reserved) Disabled Pass IRQ11 (Reserved) Disabled Pass IRQ12 (PS/2 Mouse) Enabled Pass IRQ13 (Coprocessor) Enabled Pass IRQ14 (Hard Disk) Enabled Pass IRQ15 (Reserved) Disabled Pass PnP / PCI CONFIGURATION PnP OS Installed NO Pass Reset Configuration Data Disabled Pass Resources Controlled By Auto(ESCD) Pass 9