Biostar M7NCG M7NCG user's manual - Page 7
Ddr Dimm Modules: Dimmb1/dimmb2, Dimma1 - 400
View all Biostar M7NCG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
MMootthheerrbbooaarrdd DDeessccrriippttiioonn DDR DIMM Modules: DIMMB1/DIMMB2/ DIMMA1 For Dual-channel DDR (128-bit) high performance, at least 2 or more DIMM modules must be installed. (It has to be the combination of DIMMA and DIMMB.) With only one DIMM installed, the memory performs only at 64-bit. DRAM Access Time: 2.5V Unbuffered DDR 200/266/333/400 MHz Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket Location DDR Module Total Memory Size (MB) DIMMB1 64MB/128MB/256MB/512MB/1GB *1 DIMMB2 64MB/128MB/256MB/512MB/1GB *1 Max is 3GB DIMMA1 64MB/128MB/256MB/512MB/1GB *1 ⌦The list shown above for DRAM configuration is only for reference. How to install a DIMM Module 1. The DIMM socket has a " Plastic Safety Tab", and the DIMM memory module has an "Asymmetrical notch", so the DIMM memory module can only fit into the slot in one direction. 2. Push the tabs out. Insert the DIMM memory modules into the socket at a 90-degree angle, then push down vertically so that it will fit into the place. 3. The Mounting Holes and plastic tabs should fit over the edge and hold the DIMM memory modules in place. 5