Biostar M7SUA M7SUA user's manual - Page 11
Clear CMOS Jumper: JCMOS1, Case Open Connector: JCI1 optional
View all Biostar M7SUA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Clear CMOS Jumper: JCMOS1 JCMOS1 3 Assignment 1 Pin 1-2 Close 3 Normal Operation (default) 1 Pin 2-3 Close Clear CMOS Data The following procedures are for resetting the BIOS password. It is important to follow these instructions closely. ※ Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to "Pin 2-3 close". 3. Wait for five seconds. 4. Set the jumper to "Pin 1-2 close". 5. Power on AC. 6. Reset your desired password or clear the CMOS data. Case Open Connector: JCI1 (optional) Pin Assignment 1 1 JCI1 2 Case Open Signal Ground 9
9
Clear CMOS Jumper: JCMOS1
※
Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on AC.
6. Reset your desired password or clear the CMOS data.
Case Open Connector: JCI1 (optional)
Pin
Assignment
1
Case Open Signal
1
JCI1
2
Ground
JCMOS1
Assignment
1
3
Pin 1-2 Close
Normal Operation (default)
1
3
Pin 2-3 Close
Clear CMOS Data
The following procedures are for resetting the
BIOS password. It is important to follow these
instructions closely.