Biostar M7VIB M7VIB compatibility test report - Page 71
Duron 1.1G/100
View all Biostar M7VIB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
CPU CH 1 Condition Vcore Transient Test(Dos Mode) Duron 1.1G/100 M\B VIB/1.0 STPCLK pin waveform CH3 Vcore waveform 13. Boot the system to the Win98SE environment(Command Prompt Only) Dos mode and run the stpclk.bat 14. At the main menu ,type "U" to go to the "Utilities Submenu" 15. At the next menu , type "B" to "Enable Stop Clock Throttling" 16. At this menu , type "7" to enable Stop Clock Throttling at the rang of 50.0%~65.0% 17. Press twice and then "Y" to exit the stpclk.bat program 18. Measure the Vcore waveform Vcore Transient waveform RESULT PASS 71
71
Vcore Transient Test(Dos Mode)
CPU
Duron 1.1G/100
M\B
VIB/1.0
CH 1
STPCLK pin waveform
CH3
Vcore waveform
Condition
13.
Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
14.
At the main menu ,type “U” to go to the “Utilities Submenu”
15.
At the next menu , type “B” to “Enable Stop Clock Throttling”
16.
At this menu , type “7” to enable Stop Clock Throttling at the rang of
50.0%~65.0%
17.
Press <ESC> twice and then “Y” to exit the stpclk.bat program
18.
Measure the Vcore waveform
Vcore Transient waveform
RESULT
PASS