Biostar M7VKQ M7VKQ user's manual - Page 57
Onboard Parallel Mode, ECP Mode Use DMA, Parallel Port EPP Type, Onboard Legacy Audio, Sound Blaster - pro
View all Biostar M7VKQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 2 BIOS Setup Onboard Parallel Mode Select an operating mode for the onboard parallel (printer) port. Normal EPP (Extended Parallel Port) ECP (Extended Capabilities Port) ECP+EPP PC AT parallel port Bidirectional Port Fast, buffered port Fast, buffered, Bidirectional Port. Select Normal unless you are certain your hardware and software both support EPP or ECP mode. The Choice: Normal (default), EPP, ECP, ECP/EPP. ECP Mode Use DMA Select a DMA channel for the parallel port for use during ECP mode. The Choice: 3(default), 1. Parallel Port EPP Type Select a DMA Channel for the port. The Choice: EPP1.9 (default), EPP1.7. Onboard Legacy Audio This field controls the onboard legency audio. The Choices: Enabled (default), Disabled. Sound Blaster Hardware SoundBlaster Pro for Windows DOS box and real-mode DOS legacy compatibility. The Choices: Disabled (default), Enabled. SB I/O Base Address Change the SoundBlaster Pro Base I/O Address settings. The Choices: 220H (default), 240H, 260H, 280H. SB IRQ Select Change the SoundBlaster Pro interrupt signal. The Choices: IRQ5 (default), IRQ7, IRQ9, IRQ10. 2-20