Biostar MCP6PBM2 Bios Manual - Page 20
Primary Master/Slave UDMA, IDE DMA Transfer Access, Serial-ATA Controller, IDE Prefetch Mode - drivers
View all Biostar MCP6PBM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
MCP6PB M2+ BIOS Setup Primary Master/Slave UDMA Ultra DMA function can be implemented if it is supported by the IDE hard drives in your system. As well, your operating environment requires a DMA driver (Windows 95 or OSR2may need a third party IDE bus master driver). If your hard drive and your system software both support Ultra DMA, select Auto to enable BIOS support. The Choices: Auto (default), Disabled. IDE DMA Transfer Access This item allows you to enable or disable the IDE DMA transfer access. The Choices: Enabled (default), Disabled. Serial-AT A Controller Enables support for Serial-ATA controller. The Choices: All Enabled (default), Disabled IDE Prefetch Mode The "onboard" IDE drive interfaces supports IDE prefetch function for faster drive access. If the interface on your drive does not support prefetching, or if you install a primary and/or secondary add-in IDE interface, set this option to "Disab led". The Choices: Enabled (default), Disabled. 20