Biostar NF325-A7 Nf325-A7 user's manual - Page 13

DDR Module installation - cpu support

Get Biostar NF325-A7 PDF manuals and user guides View all Biostar NF325-A7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

NF325-A7 2.2 FAN HEADERS CPU FAN Header: JCFAN1 Pin 1 1 JCFAN1 2 3 Assignment Ground +12V FAN RPM rate sense System Fan Header: JSFAN1 Pin 1 1 JSFAN1 2 3 Assignment Ground +12V FAN RPM rate sense Note: The JCFAN1 and JSFAN1support system cooling fan with Smart Fan Control utility. It supports 3 pin head connector. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND. 2.3 MEMORY MODULES INSTALLATION 2.2.1 DDR Module installation 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
NF325-A7
11
2.2
F
AN
H
EADERS
CPU FAN Header: JCFAN1
Pin
Assignment
1
Ground
2
+12V
1
JCFAN1
3
FAN RPM rate sense
System Fan Header: JSFAN1
Pin
Assignment
1
Ground
2
+12V
1
JSFAN1
3
FAN RPM rate sense
Note:
The JCFAN1 and JSFAN1support system cooling fan with Smart Fan
Control utility. It supports 3 pin head connector. When connecting with wires
onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected
to GND.
2.3
M
EMORY
M
ODULES
I
NSTALLATION
2.2.1
DDR Module installation
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the break
on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining chip
snap back in place and the DIMM is properly seated.