Biostar NF61S MICRO AM2 SE Setup Manual - Page 69
Security Option, APIC MODE, MPS Version Control For OS, OS Select For DRAM > 64MB, Full Screen - pci device
View all Biostar NF61S MICRO AM2 SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
NF61V Micro AM2 SE / NF61S Micro AM2 SE BIOS Setup Security Option This option will enable only individuals with passwords to bring the system online and/or to use the CMOS Setup Utility. System: A password is required for the system to boot and is also required to access the Setup Utility. Setup (default): A password is required to access the Setup Utility only. T his will only apply if passwords are set from the Setup main menu. APIC MODE Selecting Enabled enabl es APIC device mode reporting from the BIOS to the operating system. The Choices: Enabled (default), Disabled. MPS Version Control For OS The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor speci fication. Select version supported by the operation system running on this computer. The Choices: 1.4 (default), 1.1. OS Select For DRAM > 64MB A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB. The Choices: Non-OS2 (default), OS2. Full Screen Logo Show The Choices: Disabled, Enabled(default). Small Logo(EPA) Show This item allows you to select whether the "Small Logo" shows. Enabled (default) " Small Logo" shows when system boots up. Disabled No "Small Logo" shows when system boots The Choices: Enabled (default), Disabled Summary Screen Show This item allows you to enable/disable the summary screen. Summary screen means system configuration and PCI device listing. The Choices: Disabled (default), Enabled. 14