Biostar P4VMA-M P4VMA-M user's manual
Biostar P4VMA-M Manual
 |
View all Biostar P4VMA-M manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar P4VMA-M manual content summary:
- Biostar P4VMA-M | P4VMA-M user's manual - Page 1
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations or the Canadian Department of Communications - Biostar P4VMA-M | P4VMA-M user's manual - Page 2
its affiliated companies. Copyright Notice No part of this manual may be reproduced or transmitted in any form or by mentioned herein may be trademarks and/ or service marks of their respective owners. Intel and Business Machines Corporation. VIA is registered trademark of VIA Technologies, Inc. ATI - Biostar P4VMA-M | P4VMA-M user's manual - Page 3
instructions carefully. 2. Please keep this User's Manual for later reference. 3. Please disconnect this equipment from AC outlet before cleaning. Don't use liquid or sprayed detergent for cleaning. Use moisture sheet or clothe for cleaning. 4. For pluggable equipment, the socket by service personnel - Biostar P4VMA-M | P4VMA-M user's manual - Page 4
5 Section 2. Layout of P4VMA-M V.7.x 6 Section 3. P4VMA-M System Structure 6 Section 4. P4VMA-M Features 8 A. Hardware 8 B. BIOS & Software 9 Section 5. Package contents 10 Section 6. Installation and Setup 11 Francais Caracteristiques de P4VMA-M 19 Trouble Shooting 22 WarpSpeeder 24 TM - Biostar P4VMA-M | P4VMA-M user's manual - Page 5
Section 1. Layout of P4VMA-M V.2.x JKBMS1 1 JKBV1 JCOM1 Socket 478 CPU1 JCFAN1 DIMM1 1 Super I/O IT 8705 12 JCOM2-HEADER 9 10 JVGA1 1 JUSBV1 J1394_USB1 JUSBV2 JUSBLAN1 1 1 JNFAN1 PM 800 JAUDIO JAUDIO1 14 1 RTL8100C AGP1 PCI1 CODEC JCDIN1 1 1 9 J1394A1 IEEE 1394 VIA VT 6307 1 - Biostar P4VMA-M | P4VMA-M user's manual - Page 6
Section 2. Layout of P4VMA-M V.7.x JKBMS1 JCOM1 Socket 478 CPU1 1 JCFAN1 JVGA1 JUSB1 JUSBLAN1 JAUDIO Super I/O IT 8705 BIOS VT 6103 1 14 JAUDIO1 JCDIN1 1 CODEC JSPDIFO1 1 (Optional) CNR1 PM 800 AGP1 PCI1 PCI2 PCI3 1 FDD1 NOTE: " " represents the first pin. DIMM1 1 1 IDE1 IDE2 - Biostar P4VMA-M | P4VMA-M user's manual - Page 7
Section 3. P4VMA-M System Structure CPU+Socket478 CRT AGP4X/8X PM800 DDR200/266/333/400 8 USB2.0 VT8237 AC'97 ATA66/100/133 VT6103 (for v7.x)/ RTL8100C(for v2.x) 10Mb/s, 100Mb/s 3 PCI Master LAN ITE I/O IDE1/IDE2 BIOS Floopy/Printer/Keyboard/Mouse 7 English - Biostar P4VMA-M | P4VMA-M user's manual - Page 8
guide to help you a quick and correct installation of your system. A. Hardware CPU * Supports Socket 478. * Supports the Intel® Pentium 4 Processor. * Supports the Intel® Pentium 4 478-pin Prescott CPU. * Front Side Bus at 400/533/800 MHz. Chipset * North Bridge: VIA PM800 * South Bridge: VIA - Biostar P4VMA-M | P4VMA-M user's manual - Page 9
Function. * The BIOS configuration manual can be found in the Setup Driver CD. Software * Supports WarpspeederTM, 9th TouchTM, FLASHERTM, BootblockerTM, WinFlasherTM and StudioFun!(Optional) * Offers the highest performance for Windows 98SE, Windows ME, Windows 2000, Windows XP, Linux, UNIX series - Biostar P4VMA-M | P4VMA-M user's manual - Page 10
anything missing, please contact your dealer immediately. * HDD Cable X 1 * FDD Cable X 1 * User's Manual X1 * USB 2.0 Cable X1 (optional) * Rear I/O Panel for ATX Case X1 (optional) * Fully Setup Driver CD X1 * StudioFun! Application CD X1 (optional) * S/PDIF-Out Cable X 1 (optional) * IEEE 1394 - Biostar P4VMA-M | P4VMA-M user's manual - Page 11
how to set up jumpers and all the information about the components on the motherboard. Not only can you find the installation steps, but also the details and locations of the components on the motherboard. 1. CPU Installation The motherboard supports the Intel Pentium® Socket-478 processor. When - Biostar P4VMA-M | P4VMA-M user's manual - Page 12
and the Dimm is properly seated. 4. How to set up Jumpers? The illustration shows how to set up jumpers. When the Jumper cap is placed on pins & Slots: (1) Floppy Disk Connector: FDD1 The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M - Biostar P4VMA-M | P4VMA-M user's manual - Page 13
monitor will attach directly to that video card. This motherboard supports video cards for PCI slots, but it is also supports modem only. (6) Clear CMOS Jumper: JCMOS1 This jumper helps you to clear the Real Time Clock (RTC) Ram in CMOS. You can erase the CMOS RTC Ram data to clear the CMOS memory - Biostar P4VMA-M | P4VMA-M user's manual - Page 14
support the function "Power-on the system via USB devices function," " JUSBV1/JUSBV2/ JUSBV3" jumper cap should be placed on pin 2-3 respectively. (10) Serial ATA Connector: JSATA1/JSATA2 The motherboard has a PCI to SATA Controller with 2 channels STAT interface. It satisfies the SATA 1.0 spec - Biostar P4VMA-M | P4VMA-M user's manual - Page 15
In Header: JCDIN1 This header allows you to receive stereo audio input from sound sources, such as CD-ROM, TV Tuner, MPEG 1 are powered with +5V standby voltage. Note: In order to support the function "power-on the system via keyboard and mouse function, " "JKBV1" jumper cap should be placed - Biostar P4VMA-M | P4VMA-M user's manual - Page 16
(14) Power Connector: JATXPWR1/JATXPWR2 The motherboard supports ATX power supply for the power system. B1+ 6 B1- 7 +12V 8 +12V 9 KEY 10 Ground 1 9 J1394A1 (16) Digital Audio Connector: JSPDIFO1 The connector is used to connect SPDIF (Sony & Philips Digital Interconnect Format) interface for - Biostar P4VMA-M | P4VMA-M user's manual - Page 17
12 RT Line In/Rear Speaker Right Speaker Right 13 LFT Line In/Rear 14 LFT Line In/ Speaker Left Rear Speaker Left (19) AUDIO DJ Connector: JDJ1 (optional) Pin Assignment Pin Assignment 1 SMBDATA 2 SMBCLK 3 INT_B 4 KEY 5 ATX_PWROK JDJ1 1 (20) COM2 Header: JCOM2-HEADER (optional) Pin - Biostar P4VMA-M | P4VMA-M user's manual - Page 18
(21) Game Header: JGAME1 (optional) 16 1 Pin Assignment Pin Assignment 1 +5V 2 +5V 3 Joystick B Button 1 4 Joystick A Button 1 5 Joystick B Coordinate X 6 Joystick A Coordinate X 7 MIDI Output 8 Ground 9 Joystick B Coordinate Y 10 Ground 11 Joystick B Button 2 12 Joystick A Coordinate - Biostar P4VMA-M | P4VMA-M user's manual - Page 19
de P4VMA-M CPU * Offre les Socket-478. * Supporte le processeur Intel Pentium 4 jusqu'a 3.2GHz. * Fonctionnant en Bus Frontal de 400/ 533/ 800MHz. * Supporte Hyper-Threading. Chipset * North Bridge: VIAPM800 * South Bridge: VIA VT8237 Memoire Principale * Prend en charge un ou deux canaux de - Biostar P4VMA-M | P4VMA-M user's manual - Page 20
IDE. * Supporte PIO Mode 4, le Mode Maitre et le Mode de Maitrise de Bus Ultra DMA 33/66/100/133. LAN PHY (pour v7.x) * PHY : VIA VT6103 * * Conforme aux specifications du codec AC'97. * Supporte 6 canaux. * Interface AC'97 2.2 (pour CMI9739A)/ Interface AC'97 2.3 (pour 9761A). * Supporte S/PDIF-Out - Biostar P4VMA-M | P4VMA-M user's manual - Page 21
24.4 cm (l X L) (pour v2.0) * Facteur de Forme Micro ATX: 19.9 cm X 24.4 cm (l X L) (pour v7.2) BIOS * AWARD legal Bios. * Supporte APM1.2, ACPI, la Fonction USB. Systeme d'Exploitation * Offre les meilleures performances pour Windows 98SE, Windows ME, Windows 2000, Windows XP, Linux, SCO UNIX, etc - Biostar P4VMA-M | P4VMA-M user's manual - Page 22
data using backup disks. Screen message says "Invalid Configuration" or "CMOS Failure." * Review system's equipment. Make sure correct information is in setup. Cannot boot system after installing second hard drive. * Set master/slave jumpers correctly. * Run SETUP program and select correct - Biostar P4VMA-M | P4VMA-M user's manual - Page 23
to system. Make sure monitor is connected to display card. * Disable screen saver. Memory problem. * Reboot computer. Reinstall memory, and make sure that all memory modules are installed in correct sockets. Computer virus. * Use anti-virus programs to detect and clean viruses. Keyboard failure - Biostar P4VMA-M | P4VMA-M user's manual - Page 24
get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI Requirement OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP - Biostar P4VMA-M | P4VMA-M user's manual - Page 25
2. When you see the following dialog in setup procedure, it means setup is completed. If the "Launch the WarpSpeeder Tray Utility" checkbox is checked, the Tray Icon utility and [WarpSpeederTM] utility will be automatically and immediately launched after you click "Finish" button. 25 English - Biostar P4VMA-M | P4VMA-M user's manual - Page 26
just only for reference, the screen printed in this user manual will change according to your motherboard on hand. [WarpSpeederTM] includes 1 tray icon and 5 first window you will see is Main Panel. Main Panel contains features as follows: a. Display the CPU Speed, CPU external clock, Memory clock, - Biostar P4VMA-M | P4VMA-M user's manual - Page 27
the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is "No". If you want to get the best performance of overclocking, we recommend you click the option "Yes". 27 English - Biostar P4VMA-M | P4VMA-M user's manual - Page 28
4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Overclock Panel contains these features: English 28 - Biostar P4VMA-M | P4VMA-M user's manual - Page 29
to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the setting. Note: Because the testing programs, invoked in Auto-overclock and Verify, include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or newer runtime library is required - Biostar P4VMA-M | P4VMA-M user's manual - Page 30
panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard's BIOS model and the Version number of [ WarpSpeederTM ] utility. English 30 - Biostar P4VMA-M | P4VMA-M user's manual - Page 31
Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [ WarpSpeederTM ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels' - Biostar P4VMA-M | P4VMA-M user's manual - Page 32
03/03/2004 English 32
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
1
English
English
English
English
English
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Any changes or modification made to this equipment void the user’s authority
to operate this equipment.
This equipment generates, uses, and radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
* All external cables connecting to this basic unit must be shielded.
C. D. C. Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the radio interference regulations or the Canadian
Department of Communications.
CE Mark
This equipment is in conformity with the EMC directive.