Biostar T5 XE Bios Setup - Page 8
PIO Mode, DMA Mode, S.M.A.R.T, 32Bit Data Transfer - cfx sli 5 x
View all Biostar T5 XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
T5 XE/T5XE CFX-SLI BIOS Manual PIO Mode Select the PIO mode. Options: Auto (Default) / 0 / 1 / 2 / 3 / 4 DMA Mode Select the DMA mode. Options: Auto (Default) / SWDMA0 ~ 2 / MWDMA0 ~ 2 / UDMA0 ~ 5 S.M.A.R.T Set the Smart Monitoring, Analysis, and Reporting T echnology. Options: Auto (Default) / Disabled / Enabled 32Bit Data Transfer Enable or disable 32-bit data transfer. Options: Enabled (Default) / Disabled Hot Plug T his item allows you to control the hot-plug function under RAID or AHCI mode. Options: Disabled (Default) / Enabled Hard Disk Write Protect Disable or enable device write protection. T his will be effective only if the device is accessed through BIOS. Options: Disabled (Default) / Enabled IDE Detect Time Out (Sec) Select the time out value for detecting IDE/SAT A devices. Options: 35 (Default) / 30 / 25 / 20 / 15 / 10 / 5 / 0 ATA(PI) 80Pin Cable Detection Select the mechanism for det ecting 80Pin AT A(PI) Cable.. Options: Host & Device (Default) / Host / Device 7