Biostar TA690G AM2 Setup Manual - Page 10
JCFAN1: CPU Fan Header, JNFAN1: North Bridge Fan Header, JSFAN1/JSFAN2: System Fan Header - support
View all Biostar TA690G AM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Motherboard Manual 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN1: CPU Fan Header 14 Pin Assignment 1 Ground 2 +12V 3 FAN RPM rate sense 4 Smart Fan Control (By Fan) JNFAN1: North Bridge Fan Header JSFAN1/JSFAN2: System Fan Header JNFAN1 3 1 JSFAN2/JSFAN1 13 Pin Assignment 1 Ground 2 +12V 3 FAN RPM rate sense Note: The JCFAN1 supports 4-pin head connector. The JSFAN1/JSFAN2 and JNFAN1 support 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND. 10