Biostar TA790GX 128M Setup Manual - Page 24
Hybrid Crossfirex Function - atx
View all Biostar TA790GX 128M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Motherboard Manual CHAPTER 4: (HYBRID) CROSSFIREX FUNCTION 4.1 CROSSFIREX REQUIREMENTS Only Windows XP/Vista supports CrossFireX (Dual Video) function. A pair of graphics cards with Radeon HD3650/HD3850/HD3870/HD4850/ HD4870 GPU. The graphics card driver should support CrossFireX technology. The power supply unit must provide at least the minimum power required by the system, or the system will be unstable. A power supply above 500W is recommended under CrossFireX mode. 4.2 CROSSFIREX INSTALLATION Step 1: Insert the two CrossFireX-Ready graphics cards into PEX16_1 (Master) and PEX16_2 (Slave) PEX16_2(Sl ave) Radeo n HD3650 Pair of Radeo n HD3850/HD3870 Radeo n HD4850/HD4870 PEX16_1(Master) Notice: Make sure both the graphics cards are seated into slots completely. Step 2: Connect a 4-pin ATX power cable to Auxiliary Power Connector (JATXPWR1), this will ensure the stabilization of your system. Step 3: Connect the CrossFireX Bridge with two graphics cards. Installation completes. NOTE For more detail information of hardware/software installation and configuration of CrossFireX function, please visit following web-sites: http://ati.amd.com/technology/crossfire/tutorials.html http://ati.amd.com/technology/crossfire/howitworksdemo.html 22