Biostar TA970XE Setup Manual - Page 9
CPU_FAN1: CPU Fan Header, SYS_FAN1: NorthBridge Fan Header, SYS_FAN2: System Fan Header - cpu support
![]() |
View all Biostar TA970XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
TA970XE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. CPU_FAN1: CPU Fan Header 1 4 Pin Assignment 1 Ground 2 +12V 3 FAN RPM rate sense 4 Smart Fan Control (By Fan) SYS_FAN1: NorthBridge Fan Header SYS_FAN2: System Fan Header 31 S Y S _FA N1 Pin Assignment 1 Ground 2 +12V 3 FAN RPM rate sense 3 1 S Y S _FA N2 Note: CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND. 7
![](/manual_guide/products/biostar-ta970xe-setup-manual-321e8df/9.png)