Biostar TFORCE 945P MANUAL - Page 8
B. About FAN Headers - cpu support
View all Biostar TFORCE 945P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Biostar T-Series TForce 945P Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation. B. About FAN Headers CPU FAN Power Header: JCFAN1 System Fan Power Headers: JSFAN1 4 JCFAN1 1 JCFAN1: Pin Assignment 1 Ground 2 +12V 3 FAN RPM rate sense 4 Smart Fan Control JSFAN1 JSFAN1: 31 13 Pin Assignment 1 Ground 2 +12V 3 FAN RPM rate sense Note: JCFAN1 reserves system cooling fan with Smart Fan Control utilities. It supports 4 pin head connector. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND. 6 User's Manual