Biostar TP43D2-A7 Setup Manual - Page 16
J1: Auxiliary Power for Graphics, SATA1~SATA6: Serial ATA Connectors - specs
View all Biostar TP43D2-A7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Motherboard Manual J1: Auxiliary Power for Graphics This connector is an auxiliary power connection for graphics cards. Exclusive power for the graphics card provides better graphics performance. Pin Assignment 4 1 +12V 2 Ground 3 Ground 4 VCC 1 SATA1~SATA6: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 6 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s. SATA1 SATA2 SATA3 SATA4 SATA5 SATA6 14 7 Pin Assignment 1 Ground 2 TX+ 3 TX4 Ground 5 RX6 RX+ 7 Ground 14
Motherboard Manual
14
J1: Auxiliary Power for Graphics
This connector is an auxiliary power connection for graphics cards. Exclusive
power for the graphics card provides better graphics performance.
Pin
Assignment
1
+12V
2
Ground
3
Ground
4
VCC
1
4
SATA1~SATA6: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 6 channels SATA interface,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
Pin
Assignment
1
Ground
2
TX+
3
TX-
4
Ground
5
RX-
6
RX+
1
4
7
SATA1
SATA2
SATA3
SATA4
SATA5
SATA6
7
Ground