Biostar TZ68A Setup Manual - Page 27
CPU Smart FAN, CPU FAN Calibrate, Control Mode, Fan Ctrl OFF, Fan Ctrl On, Fan Ctrl Start Value, Fan - bios
View all Biostar TZ68A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
TZ68A+ Advanced SMART FAN Control CPU Smart FAN > CPU FAN Calibrate Control Mode FAN Ctrl OFF(oC) FAN Ctrl ON(oC) FAN Ctrl Start value FAN Ctrl Sensitive BIOS SETUP UTILITY [Disabled] [Manual] CPU FAN Smart control function. [Disabled]: Full ON [Auto]:By parameters below. Enter +/F1 F3 F4 ESC Select Screen Select Item Select Change Opt. General Help Optimized Defaults Save & Reset Exit Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc. CPU Smart FAN This item allows you to control the CPU Smart Fan function. CPU FAN Calibrate Press [ENTER] to calibrate CPU FAN. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF(℃) When CPU temperature is lower than this value, the CPU fan will keep lowest RPM. The range is from 0~127, with an interval of 1. Fan Ctrl On(℃) When CPU temperature is higher than this value, the CPU fan controller will turn on. The range is from 0~127, with an interval of 1. Fan Ctrl Start Value This item sets CPU FAN Start Speed Value. The range is from 0~127, with an interval of 1. Fan Ctrl Sensitive The bigger the numeral is, the higher the FAN speed is. The range is from 0~127, with an interval of 1. 25