Bissell BISSELL® Symphony All-in-One Vacuum and Steam Mop 1132 User Guide - Page 8
Warning, Caution
View all Bissell BISSELL® Symphony All-in-One Vacuum and Steam Mop 1132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Maintenance & Care Empty Dirt Tank The dirt tank needs to be emptied when the dirt reaches the 'Full' line on the side of the tank. 1. Unplug hard floor cleaner from electrical outlet. 2. Remove the Easy Empty dirt tank from the unit by moving the lock button on the front of the unit to the left. 3. Hold the dirt tank over a garbage container. Press the bottom lid release button on the back of the dirt tank to empty dirt. 4. Mount the Easy Empty dirt tank back on the vacuum base and push the lock button to the right until it is centered on the front of the unit. Note: The dirt tank may be washed in warm water with a mild detergent. Make sure it is completely dry before replacing. WARNING To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. 2. 3. Cleaning or Replacing the Vacuum Filter The key to maximum performance is having a clean filter. Cleaning the filter after each use will help your vacuum operate at peak efficiency. Use only genuine BISSELL model number 1250 replacement filters in your BISSELL hard floor cleaner. To purchase visit www.BISSELL.com. To clean filter: 1. Turn power off and unplug unit. 2. Remove the dirt container from the unit, as directed above. 3. Remove filter and tap firmly against the inside of a waste container, removing any visible dirt. 4. Replace filters back into the dirt container and attach dirt container to the base of the unit. Slide the lever to your right to lock. NOTE: • After heavy usage, you may clean the pre-motor, foam filter by washing it gently by hand in warm water and mild dish detergent. Rinse thoroughly and make certain it is completely dry before replacing it. • You may replace the paper, pleated filter when dirty. Recommended replacement is every 6 months. Reference page 10 for replacement part information. CAUTION Upright storage of the cleaner with a wet mop pad may result in the formation of white marks on your floor. To remove the white marks, clean area with vinegar. 2. 3. www.bissell.com 8