Bissell Big Green Complete® Deep Cleaner/Vacuum 7700 User Guide - English - Page 6

Assembly Your Big Green Complete is easy to assemble and requires no tools: 1. Attach hose to Quick Release™ Hose Door by inserting fitted end and turning clockwise until you hear it click into the locked position. 2. Attach hose solution line to unit by inserting fitted end into the machine. Turn clockwise until it snaps into place. 1 3. Snap the two wand pieces together by lining up tabs with holes and clicking together. Be sure that the wand piece with the adaptor (see figure 4) is the one you will attach the tool to. Attach assembled wand to grip using the same technique. 4. Snap the desired tool on the end of the wand. 3 5. Place wand adaptor into the wand caddy on the side of the unit. 6. Place either tool caddy or solution tank (if wet clean mode is desired) onto the back of the machine. 5 Warning: Do not plug in your cleaner until you have completely assembled it per the above instructions and are familiar with all instructions and operating procedures. 2 4 6 Wand Caddy Wand Adaptor 6 w w w. b i s s e l l . c o m 800.237.7691