Bissell Big Green Machine Carpet Cleaner 86T3 User Guide - Page 6

Caution, Warning

Get Bissell Big Green Machine Carpet Cleaner 86T3 PDF manuals and user guides View all Bissell Big Green Machine Carpet Cleaner 86T3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Operations Carpet cleaning 1. Remove dirty water tank by pulling dirty water tank handle to upright position and lift up to remove dirty water tank. 2. Lift clean water tank from the base of machine. a. Unscrew cap on top of the clean water tank. Fill tank to FILL line with clean, hot tap water. Do not boil or microwave water. b. Measure BISSELL formula using cap on tank. Fill cap to line twice for each full tank of water. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. c. Screw cap back onto clean water tank and place tank onto base of the machine. 3. Replace dirty water tank securely on top of the clean water tank and push handle back to lock into place. 4. Plug into a proper outlet and turn the power switch to the ON ( I ) position. 5. Recline handle by pushing down on the green lever on the back of the machine while pulling back on handle. 6. Cleaning strokes. While pressing the trigger, make one slow forward wet pass and another back. Let the formula and DirtLifter PowerBrush do the work for you. Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object and then plug machine in to reset the circuit breaker. 7. Cleaning strokes. Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you can't see any more water being pulled up. 8. Remove the dirty water tank by pulling the handle to the upright position and lift up. Carry the tank like a bucket to a utility sink or outside where you will dispose of the dirty water. 9. Unlatch the top of the tank from the bottom by pushing the handle all the way forward and lifting the top off. Pour dirty water into the sink. Note: You may notice hair and debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up and thrown away. 10. Fill the clean water tank with clean hot tap water and follow instructions 2 - 9 to continue cleaning. www.bissell.com 6 800.237.7691 CAUTION Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure. 1. 1. 2. 2a. 2c. 3. 3. 5. 8. 9. 9. WARNING To reduce the risk of injury, be extra careful when cleaning stairs. Make sure machine is secure and level.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Operati´s
www.BISSELL.com
800.237.7691
6
Carpet cleaning
1.
Remove dirty water tank by pulling dirty
water tank handle to upright position and lift up
to remove dirty water tank.
2.
Lift clean water tank from the base of machine.
a.
Unscrew cap on top of the clean water tank.
Fill tank to
FILL
line with clean, hot tap water.
Do not boil or microwave water.
b.
Measure BISSELL formula using cap
on tank. Fill cap to line twice for each full
tank of water. Always use genuine BISSELL
formulas to maximize cleaning and for the
safety of your machine.
c.
Screw cap back onto clean water tank and
place tank onto base of the machine.
3.
Replace dirty water tank securely on top of
the clean water tank and push handle back to
lock into place.
4.
Plug into a proper outlet and turn the power
switch to the ON (
I
) position.
5.
Recline handle by pushing down on the
green lever on the back of the machine while
pulling back on handle.
6. Cleaning strokes
. While pressing the trigger,
make one slow forward wet pass and another
back. Let the formula and DirtLifter PowerBrush
do the work for you.
NOTE: Your machine is equipped with a circuit
breaker that will automatically shut off the brush
if a large or loose object is caught in the brush
roll. If that happens, be sure to unplug your
machine, remove the foreign object and then
plug machine in to reset the circuit breaker.
7. Cleaning strokes
. Release the trigger and
make one slow forward and backward pass over
the same area to remove any residual dirty water
and aid in drying. Repeat cleaning passes until
solution being pulled up appears clean. Continue
passes without pressing the trigger until you
can’t see any more water being pulled up.
8.
Remove the dirty water tank by pulling the
handle to the upright position and lift up. Carry
the tank like a bucket to a utility sink or outside
where you will dispose of the dirty water.
9.
Unlatch the top of the tank from the bottom
by pushing the handle all the way forward and
lifting the top off. Pour dirty water into the sink.
NOTE: You may notice hair and debris deposits
on the carpet or in the tank that were loosened
by the cleaning action (especially with newer
carpets that have never been deep cleaned
before). This debris should be picked up and
thrown away.
10.
Fill the clean water tank with clean hot tap
water and follow instructions 2 - 9 to
continue cleaning.
CAUTION
Do not overwet. Take care not to run over
loose objects or edges of area rugs. Stalling
brush may result in premature belt failure.
3.
1.
2c.
3.
5.
1.
2.
2a.
9.
8.
9.
WARNING
To reduce the risk of injury, be extra careful when cleaning
stairs. Make sure machine is secure and level.