Bissell Big Green Machine Professional Carpet Cleaner 86T3 User Guide - Page 12

Troubleshooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Reduced spray or no spray Possible causes Water tank may be empty Tank may not be seated completely Pump may have lost prime. Debris filter on base is clogged Remedies Fill clean tank with hot tap water Turn power OFF (0). Remove and reseat tank Turn power OFF (0) and then back ON (I). Wait one minute, then depress trigger Turn power OFF (0). Use hand to remove debris The belt is off or broken DirtLifter® PowerBrush does not turn The unit is in the upright position Circuit breaker on machine may have tripped Turn power OFF (0) and unplug unit from outlet. Follow instructions on page 10 Brushes only rotate when unit is reclined using the recline handle Turn the machine OFF (0) and unplug from outlet. Check to see if foreign object is caught in brush roll. Remove object. Plug machine in to reset circuit breaker Cleaner not picking up solution Tanks may not be seated properly Turn the machine OFF (0). Pick up both the clean and dirty water tanks and reseat them so they fit snuggly on the unit Clean water tank is empty Check fluid levels in clean water tank and refill if necessary Dirty water tank has picked up the Empty dirty water tank. maximum amount Red float "door" in the tank may have closed as a result of bumping an object or moving machine back and forth too quickly Turn the machine OFF (0), allowing red float door to release into the open position. Turn the unit back ON (I) to continue cleaning. Be sure your forward and backward strokes are completed at a slower pace Front nozzle of machine is clogged Turn the machine OFF (0). Use fingers to remove any debris from this area. Upper body filter is clogged Turn the machine OFF (0). Use fingers to remove any debris from this area. Please do not return this product to the store. Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. www.bissell.com 12 800.237.7691