Bissell CleanView OnePass Bundle B0021 User Guide - Page 8

Notice, Warning

Get Bissell CleanView OnePass Bundle B0021 PDF manuals and user guides View all Bissell CleanView OnePass Bundle B0021 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Operations Power cord storage When you have finished using your BISSELL CleanView vacuum, return it to the upright position and store the power cord. 1. Turn vacuum cleaner off. 2. Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect from outlet. 3. Wrap power cord around cord wraps located on the back of the vacuum. 4. Clip molded plug to power cord to secure. NOTICE: While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply. Maintenance and care To maintain maximum cleaning performance, the following maintenance steps must be performed: 1. Empty the dirt tank when the dirt reaches the "Full" line on the side. 2. Check the pre-motor filter at least once a month and clean or replace as needed. To access the pre-motor filter, remove the Easy Empty dirt tank from the vacuum base and push the lid release button located on the carry handle. Remove the foam filter from the filter tray. 2. 3. The post-motor filter assists in the filtration process to return clean air to the room. Replace the post-motor filter every three to six months. To access the post-motor filter, remove the filter tray located below the Easy Empty dirt tank. When the filter becomes dirty, push the filter through the bottom of the tray to clean or replace the filter. Note: the white, pleated post-motor filter may NOT be washed with 3. water or detergent. If dust and/or debris accumulates on the filter, gently tap the filter on the side of a garbage container. Note: More frequent filter cleaning or replacing may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps. WARNING: To reduce the risk of electric shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. Lid Release Button Post-Motor Filter Tray 8 w w w. b i s s e l l . c o m 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
www.bissell.com
800.237.7691
O
perations
8
Power cord storage
When you have finished using your BISSELL
CleanView vacuum, return it to the upright
position and store the power cord.
1.
Turn vacuum cleaner off.
2.
Unplug power cord by grasping the
polarized plug (NOT the cord) and
disconnect from outlet.
3.
Wrap power cord around cord wraps
located on the back of the vacuum.
4.
Clip molded plug to power cord to secure.
To maintain maximum cleaning performance, the
following maintenance steps must be performed:
1.
Empty the dirt tank when the dirt reaches
the “Full” line on the side.
2.
Check the pre-motor filter at least once a
month and clean or replace as needed.
To access the pre-motor filter, remove the
Easy Empty dirt tank from the vacuum base
and push the lid release button located on
the carry handle. Remove the foam filter
from the filter tray.
3.
The post-motor filter assists in the filtration
process to return clean air to the room.
Replace the post-motor filter every three to
six months. To access the post-motor filter,
remove the filter tray located below the Easy
Empty dirt tank. When the filter becomes
dirty, push the filter through the bottom of the
tray to clean or replace the filter.
NOTE: the white, pleated post-motor
filter may NOT be washed with
water or detergent. If dust and/or
debris accumulates on the filter,
gently tap the filter on the side of a
garbage container.
NOTE: More frequent filter cleaning
or replacing may be necessary if you
are vacuuming new carpet, fine dust,
or have allergy concerns. Follow the
instructions on the following pages
to perform these simple maintenance
steps.
NOTICE:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges. The
discharges are entirely harmless and
are not associated in any way with
the main power supply.
WARNING:
To reduce the risk of electric
shock, turn power switch OFF
and disconnect polarized plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
3.
M
aintenance and care
2.
Lid Release
Button
Post-Motor
Filter Tray