Bissell Easy Vac User Guide - Page 5
Index, How to use your BISSELL EASY VAC, Upright floor cleaning, Cleaning with the Canister - power brush vacuum
View all Bissell Easy Vac manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
How to use your BISSELL EASY VAC™ Power Cord Quick Release The Power Cord is stored at the side of the Canister, looped around two Cord Wraps. A molded clip on the polarized plug allows it to be clipped to the Power Cord during storage. 1. Remove the plastic plug guard and dispose or recycle it. 2. Unclip polarized plug from Power Cord. 3. Rotate the Upper Cord Wrap one-half turn right or left, and slip Power Cord from Upper and Lower Cord Wraps. Upper and Lower Cord Wraps 4. Connect Power Cord Plug with a polarized outlet. 5. To keep the Power Cord out of your way while cleaning, place it in the cord hook at the top/back of the handle. Power Switch The Power Switch is located just below the hand grip. Move the switch to position " " [down] to vacuum, and " " [up] to turn unit off when cleaning is complete. Upright floor cleaning Floor Nozzle Adjustment You can adjust the brush on the underside of the Floor Nozzle to clean bare floors or carpeted areas. 1. Move the lever on the Floor Nozzle to Floor Nozzle Adjustment Lever the left ( ) for bare floor vacuuming, and the brush will adjust to slight variations in floor height. 2. Move the lever to the right ( ) and the brush will lock in position for more effective cleaning of carpeted surfaces. Cleaning with the Canister Your BISSELL EASY VAC™ is not only a convenient upright bare floor and carpet cleaner, it's also a versatile floor/above floor vacuum cleaner when you detach the lightweight canister. Floor Cleaning 1. Detach the Upright Handle by pressing your thumb and forefinger on the lock buttons on Canister (using a "pinching" motion) while gently pulling Handle off square end of Canister. 2. For floor surface cleaning, use the Floor Nozzle, following the surface adjustment instructions. 3. For edge cleaning or cleaning small areas, you need only to: s Detach the Hose from the Hose Port at the bottom/ back of the Canister. Press the lock button and pull the Hose from the Port, then insert the Crevice Tool into the end of the Hose. The Crevice Tool also can be placed in the round opening of the canister for added versatility. Index Safety instructions 2 Product view 3 How to put it together 4 Index 5 How to use your BISSELL EASY VAC 5-6 Maintenance 7 Troubleshooting 8 Replacement parts 9 Warranty 10 Consumer services 10 5