Bissell FeatherWeight Vacuum User Guide - English - Page 5
Warning - filters
View all Bissell FeatherWeight Vacuum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
How to Use Your BISSELL 3 Way / FeatherWeight Vacuum Your 3 Way / Featherweight Vacuum may be used in one of three ways. See 1 instructions below for converting your vacuum to best meet each need. 1. As a Floor Vacuum: Open the Latch at the base of the Hand Vacuum Grip and insert Handle. Once Handle is all the way inserted into the body of the vacuum, press the Latch closed to secure the Handle in place. Attach the Floor Nozzle by inserting it into the opening at the bottom of the Dirt Container. Press firmly to secure in place. 2 2. As a Hand Vacuum: Release the Latch from the Handle and pull Handle away from the unit. Press the Latch closed. 3. As a Multi-Purpose Vacuum: The Crevice Tool and Floor Nozzle may be used with either the Hand Vacuum or the Floor Vacuum. To use for cleaning in tight spaces, insert the Crevice Tool into the opening at the bottom of the Dirt Container. Press firmly to secure in place. To clean a wider surface, remove the Crevice Tool and attach the Floor Nozzle by inserting it into the opening at the bottom of the Dirt Container. Press firmly to secure in place. 3 Power Cord Storage 1. Turn Vacuum off. 2. Unplug Power Cord by grasping the polarized plug, NOT the cord, and disconnect from outlet. 3. Loop Power Cord around Cord Wraps on the Handle. 4. Clip molded plug to Power Cord to secure. Maintenance To maintain maximum performance from your BISSELL 3 Way / FeatherWeight Vacuum, perform these simple maintenance checks: WARNING: To avoid injury, turn cleaner OFF and unplug Cord from wall when not in use. Emptying the Dirt Container 1 1. To remove dirt from the Dirt Container and Filter, hold the vacuum vertically as shown. Depress and hold Latch on top of the vacuum to release the Dirt Container. 2. Gently pull Dirt Container away from the Hand Vacuum Grip and empty into waste container. 3. The Dirt Container may be rinsed with warm water and a mild detergent if needed. The Dirt Container must be thoroughly dried before replacing. 2 4. Attach Dirt Container to vacuum by depressing Latch and securely fitting onto Hand Grip. Make sure Dirt Container is correctly secured. 5