Bissell Hard Floor Expert Deluxe Canister Vacuum 1161 User Guide - Page 7

Troubleshooting Problem Motor not operating Weakened suction power Possible causes Check that the plug is connected to the socket securely Full dust cup Dusty filter(s) Clog in the hard floor tool or hose Power cord cannot be rewound completely Power cord cannot be pulled out Infrared remote control failure Variable suction set to the lowest speed The power cord may pile on one side of the coiler Power cord may be twisted Batteries may be bad Bad infrared connection Vacuum not turning on with remote control The main power switch on the vacuum body was not turned on Remedies Re-plug Empty dust cup Check and clean or replace filters Follow instructions E3 on page 6 for cleaning the hard floor tool. Press the "+" on the remote to dial up the suction Pull out a large section of the cord and rewind it Press the REWIND button and rewind or pull out the cord repeatedly Replace batteries Make sure the infrared lights are not hidden and are visible Turn on the power on the base of the canister, which will activate the remote control REPLACEMENT PARTS 160-2083 Handle Assembly 160-2084 Pre-motor filter / Pleated filter WARNING To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical socket before performing maintenance or troubleshooting checks. ACCESSORIES 160-2085 Pre-motor filter / Foam filter 160-2089 Carpet Tool 160-2094 Post-motor filter / Foam 160-2090 Hard Floor Tool 160-2086 160-2087 Post-motor filter / Unwoven cloth Tool Holder 160-2091 160-2092 Telescopic Extension Wand Crevice Tool 160-2088 Dirt Tank 160-2093 Upholstery Tool Please do not return Other maintenance or service not included in the manual should be performed by an authorized service representative. this product Thank you for selecting a BISSELL product. to the store. For any questions or concerns, BISSELL is happy to be of service. Contact Consumer Care listed on page 8. 7