Bissell Lift-Off® Floors & More PET 53Y81 User Guide - Page 8
Warning
View all Bissell Lift-Off® Floors & More PET 53Y81 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Maintenance and care Brush roll and brush roll belt maintenance continued Brush roll reset: If larger debris becomes lodged in the foot of the unit and the brush roll shuts off, turn the unit off and remove the obstruction. Wait approximately 15 seconds for the motor to cool down before turning back on. Brush will function again after allowing time to cool down. Brush roll belt replacement: If the brush roll belt should break, call 1-800-237-7691 or visit WWW. BISSELL.COM to purchase replacement belt. Replacement instructions: 1. Turn power OFF (O). Remove foot 2. assembly from unit and turn over to access the brush roll belt. 2. Remove three Phillips head screws to remove the belt cover. 3. Locate broken belt. 4. Replace belt. 5. Place brush roll back into foot of unit. 3. 6. Replace the belt cover and secure with three screws. 7. Attach foot assembly on unit. Disposal of batteries WARNING: This product contains Nickel Metal Hydride (NiMH) rechargeable batteries. According to Federal and State TM regulations, removal and proper disposal of NiMH batteries is required. For removal of the batteries in your LiftOff Floor & More stick vacuum see instructions below. If your Lift-Off Floors & More stick vacuum is to be disposed of, the batteries should 3. be removed and disposed of properly. 1. IMPORTANT: Unplug Charger. 2. Remove hand vac from unit and remove dirt cup from handle. 3. Remove (5) Phillips head screws on the handle and cover. 8 w w w. b i s s e l l . c o m 5 screws 800.237.7691