Bissell Lift-Off® Steam Mop Hard Surface Cleaner 39W78 Lift-Off® - Page 9

Maintenance and care When you're done 1. Unplug power cord from outlet. 2. Carefully remove mop pad from swivel head, as mop pad and lower assembly will be hot. 3. Any water remaining in the water tank should be emptied prior to machine storage. CAUTION: Upright storage of the Lift-Off Steam Mop with a wet mop pad may result in the formation of white marks on your floor. To remove the white marks, clean area with vinegar. 4. Mop pad can be machine washed in warm water. Use only liquid detergents. Do not use bleach or fabric softeners; for best results, air dry. 5. Wrap power cord around quick release cord wrap on side of Detachable Steam Pod. Replacing the water purification system If you fill your Lift-Off Steam Mop cleaner with normal tap water, it is essential to check the water purification system and replace it when it is no longer effective. Change the filter when the bright green grains turn blue. If the filter is not changed at the appropriate time, calcium deposits will accumulate on the heating element, causing damage or reduced performance. Using distilled or demineralized water will maximize the performance of your filter. To order a replacement water purification system, refer to the replacement parts section on page 10. Tip: Using distilled or demineralized water will maximize the performance of your filter. Tip: Be sure to use only a BISSELL water filter in your Lift-Off Steam Mop. www.bissell.com 9 800.237.7691