Bissell Momentum® Vacuum User Guide - English - Page 17

Please do not return this product to the store.

Get Bissell Momentum® Vacuum PDF manuals and user guides View all Bissell Momentum® Vacuum manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Troubleshooting WARNING: To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Vacuum cleaner won't run Possible causes 1. Vacuum cleaner is not plugged in 2. Blown fuse/tripped breaker Remedies 1. Check electrical plug 2. Check/replace fuse or reset breaker Vacuum cleaner or tools won't pick up dirt Possible causes Remedies 1. Incorrect height adjustment 1. Adjust powerfoot to correct height 2. Hose not attached to suction opening 2. Firmly push hose wand into the suction opening 3. Twist 'n Snap hose not securely attached 3. Make sure Twist 'n Snap hose is snapped into locked position 4 Crack or hole in hose 4. Check hose and replace if needed 5. Broken or worn drive belt 5. Replace drive belt, see page 13 6. Rotating floor brush bristles worn 6. Replace brush 7. Rotating floor brush jammed 7. Remove brush and clean debris from brush ends 8. Clog in vacuum 8. Clear clog, see page 15 9. Dirt container full 9. Empty dirt container 10. Dirt container or upper tank not installed properly 10. Position correctly and lock in place 11. Filters are dirty 11. Check and clean upper tank, pre-motor and post-motor filters 12. TurboBrush is clogged or debris is wrapped around the brush roll 12. Maintaining TurboBrush, see page 14 Vacuum cleaner is difficult to push Possible causes Remedies 1. Incorrect height adjustment Visible dirt escaping from cleaner Possible causes 1. Adjust powerfoot to correct height setting Remedies 1. Dirt container full 1. Empty dirt container 2. Filters missing or installed incorrectly 2. Check upper tank, pre-motor and post-motor filters for correct installation 3. Dirt container installed incorrectly 3. Pull out and re-insert dirt container correctly Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. www.bissell.com 17 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
www.bissell.com
800.237.7691
17
T
roubleshooting
Vacuum cleaner won’t run
Possible causes
Remedies
1.
Vacuum cleaner is not plugged in
1.
Check electrical plug
2.
Blown fuse/tripped breaker
2.
Check/replace fuse or reset breaker
Vacuum cleaner or tools won’t pick up dirt
Possible causes
Remedies
1.
Incorrect height adjustment
1.
Adjust powerfoot to correct height
2.
Hose not attached to suction opening
2.
Firmly push hose wand into the suction opening
3.
Twist ‘n Snap hose not securely attached
3.
Make sure Twist ‘n Snap hose is snapped into locked position
4
Crack or hole in hose
4.
Check hose and replace if needed
5.
Broken or worn drive belt
5.
Replace drive belt, see page 13
6.
Rotating floor brush bristles worn
6.
Replace brush
7.
Rotating floor brush jammed
7.
Remove brush and clean debris from brush ends
8.
Clog in vacuum
8.
Clear clog, see page 15
9.
Dirt container full
9.
Empty dirt container
10.
Dirt container or upper tank not installed properly
10. Position correctly and lock in place
11.
Filters are dirty
11. Check and clean upper tank, pre-motor and post-motor filters
12.
TurboBrush is clogged or debris is wrapped
12. Maintaining TurboBrush, see page 14
around the brush roll
Vacuum cleaner is difficult to push
Possible causes
Remedies
1.
Incorrect height adjustment
1.
Adjust powerfoot to correct height setting
Visible dirt escaping from cleaner
Possible causes
Remedies
1.
Dirt container full
1.
Empty dirt container
2.
Filters missing or installed incorrectly
2.
Check upper tank, pre-motor and post-motor filters for
correct installation
3.
Dirt container installed incorrectly
3.
Pull out and re-insert dirt container correctly
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
WARNING:
To reduce the risk of electric shock, turn power OFF
and disconnect plug from electrical outlet before
performing maintenance or troubleshooting.