Bissell Pet Hair Eraser® Vacuum 87B43 User Guide - English - Page 17
Please do not return this product to the store.
View all Bissell Pet Hair Eraser® Vacuum 87B43 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Troubleshooting Vacuum cleaner and tools won't pick up dirt Possible causes Remedies 1. Incorrect height adjustment 2. Hose not attached to suction opening 3. Twist 'n Snap hose not securely attached 4. Crack or hole in hose 5. Broken or worn drive belt 6. Rotating floor brush bristles worn 7. Rotating floor brush jammed 8. Clog in vacuum 9. Dirt container full 10. Dirt container not installed properly 11. Filters are dirty 12. TurboBrush is clogged or debris is wrapped around the brush roll 1. Adjust powerfoot to correct height 2. Firmly push curved hose wand into hose wand base 3. Make sure Twist 'n Snap hose is snapped into locked position 4. Check hose and replace if needed 5. Replace drive belt, see pages 12-13 6. Replace brush 7. Remove brush and clean debris from brush ends 8. Clear clogs, see page 15 9. Empty dirt container 10. Position correctly and lock in place 11. Check pre-motor and post-motor filters 12. Maintaining TurboBrush, see page 14 Vacuum cleaner is difficult to push Possible causes Remedies 1. Incorrect height adjustment Visible dirt escaping from cleaner Possible causes 1. Adjust powerfoot to correct height Remedies 1. Dirt container full 2. Filters missing or installed incorrectly 3. Dirt container installed incorrectly 1. Empty dirt container 2. Check pre-motor and post-motor filters for correct installation 3. Pull out and re-insert dirt container correctly Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. www.bissell.com 17 800.237.7691