Bissell PowerFresh Lift-Off Steam Mop Pet 1544 User Guide - Page 5

Assembly To assemble the unit 1. Insert the body into the foot until you hear the locking tab click. 2. Insert handle into the top of the body. 1. 3. In the middle hole on the left side on the unit insert the provided screw and tighten. WARNING Do not plug in your hard floor cleaner until you are familiar with all instructions and operating procedures. 2. Operations Special Features Easy Touch Digital Controls™ The fingertip power control are located on the front of the Lift-Off™ Pod. NOTE: On/Off button is to turn ON or turn OFF the steam. Press ON or OFF before choosing HI or LO steam. (HI) - High Steam Use for durable floors or on sticky messes. To turn steam on, press once. Click again to turn steam off. (LO) - Low Steam Use on delicate floors or for light, everyday cleaning. To turn steam on, click once. Click again to turn steam off. NOTE: The "ready" light will blink while the steam mop heats up. The "ready" light will be solid and lit up when heat up is complete. Press the On/Off button first. Then choose HI or LO steam. NOTE: To turn steam off, press the On/Off button. Microfiber Mop Pads Reusable microfiber mop pads are machine washable and safe for virtually all hard floor surfaces. The white microfiber pad is best for everyday use on delicate flooring like sealed hardwoods and laminate. The gray and white striped pad can be used for scrubbing heavily soiled floors and cleaning tougher messes. NOTE: The type and quantity of pads included varies per model. Fragrance Discs Use the fragrance disc with your steam mop to obtain a fresh scent. Insert the fragrance disc into pocket inside the mop pad. Use the whole disc for a refreshing scent or cut in half for a lighter scent. WARNING Exercise extreme care when using your steam mop on hardwood floors. Prolonged application of steam in one area increases the risk of damage to the surface treatment on timber floors. Test steam mop in an inconspicuous area before mopping a large area. The steam mop generates hot steam, so move the unit continuously when cleaning. Regular foot traffic and direct sunlight will wear down timber floor surface treatment, making it more susceptible to steam damage. Check with your timber floor treatment and application specialist prior to steam mop operation. Tip » Do not attempt to use your hard floor cleaner on the steam setting without water in the tank. You may hear a knocking sound indicating there is no water. Easy Scrubber (Attached to Mop Head) Quickly clean sticky messes by lowering the Easy Scrubber with your foot and locking it into position. Clean grout and crevices easily with this effective tool. www.BISSELL.com 5