Bissell PowerGlide Deluxe Pet Vacuum with Lift-Off Technology 27636 User Guide - Page 8

Maintenance & Care To maintain maximum cleaning performance, the following maintenance steps must be performed: 1. Empty the dirt container before the dirt reaches the "Full" line. 2. Check the pre-motor filters at least once a month and clean and replace as needed. See "Cleaning the pre-motor filter" on page 9. 3. Check and replace the post-motor filter as needed. See "Replacing/Cleaning the post-motor filter" on page 9. NOTE: More frequent filter cleaning may be necessary if you are vacuuming new carpet, fine dust or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps. WARNING To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. WARNING Do not operate vacuum with damp or wet filters or without all filters in place. Empty Dirt Container The dirt tank needs to be emptied before the dirt reaches the 'Full' line on the side of the tank. 1. Unplug cleaner from electrical outlet. 2. Remove the Easy Empty dirt tank from 2. 3. the vacuum base by pushing the tank release button. 3. Hold the dirt tank over a garbage container. Press the bottom lid release button on the lower back of the dirt tank to empty dirt. 4. Mount the Easy Empty dirt tank on the vacuum base. NOTE: The dirt tank may be washed in warm water with a mild detergent. Make sure it is completely dry before replacing. Cleaning the inner cyclone Unplug the cleaner from electrical outlet. 1. 1. With the bottom of the Easy Empty dirt tank open, reach up into the tank and grasp the cyclone. Twist the cyclone counter-clockwise to unlock and pull straight down to remove. 2. The inner cyclone and dirt tank may be wiped clean with a damp cloth. Make sure all parts are dry before replacing. www.bissell.com 8 800.237.7691