Bissell PowerSteamer Pro Upright Carpet Cleaner 16977 User Guide - Page 6
Assembly
View all Bissell PowerSteamer Pro Upright Carpet Cleaner 16977 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Assembly Your BISSELL PowerSteamer comes in three, easy to assemle components: Upper handle Lower handle Tool Caddy The only thing you will need to assemble your cleaner is a Phillips head screwdriver. 1. Slide upper handle onto lower handle. 2. Feed bundled power cord through tool caddy from caddy's flat side. 3. Align upper handle holes and tool caddy holes. 4. Place hex nut into back of tool caddy and hold in place. Insert bolt from front to back turning into the 1. hex nut until snug. Do not over tighten. Repeat for the second bolt and hex nut. 5. Insert 2 screws into lower 2 holes. Turn until snug. 6. Snap tools into storage on the tool caddy. 7. Wrap power cord and flex hose as shown in figure 7. PowerSteamer assembly is now complete. 3. Warning: Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures. 2. 4. 5. 7. ON OFF 6. ON OFF 6 www.bissell.com 800.237.7691