Bissell Powerforce Helix Bagless Upright Vacuum 1700 Users Guide - Page 10
Troubleshooting
View all Bissell Powerforce Helix Bagless Upright Vacuum 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Troubleshooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Vacuum cleaner won't run Possible causes Power cord not plugged in Blown fuse/tripped breaker Dirt container is full Filter dirty Remedies Check electrical plug Check/replace fuse or reset breaker Empty dirt container Check, remove debris or clean Hose not secure Dirt container not in place Vacuum cleaner won't pick up dirt Vacuum path clogged Rotating power brush drive belt broken Drive belt stretched Floor brush bristles worn Floor brush jammed Check to be sure hose is snapped into place at both ends Make sure dirt container is completely inserted and snapped into place. Visually check air passageway, hose inlet, and hose for anything that might be obstructing the vacuum path. Carefully remove blockage. Replace drive belt Check drive belt area and remove obstructions. Replace drive belt if necessary Replace floor brush Remove floor brush and clean debris from brush and ends. Check drive belt for any damage 10 www.BISSELL.com