Bissell ReadyClean PowerBrush Deep Cleaner 47B2 User Guide - Page 9

Troubleshooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Possible causes Remedies Reduced spray OR no spray Solution tank empty Lint screen on solution tank cap clogged Spray Nozzle Clogged Upper handle is not in the upright and locked position Refill tank with water and formula Soak solution tank cap in warm water and then rinse under running water Clean Spray nozzle by rinsing under water Rotate the retractable handle lock, pull handle up and return the handle lock to the locked position. Deep cleaner not picking up cleaning solution Collection tank not aligned/ secured Collection tank full Removable nozzle installed improperly Removable nozzle full of debris Red lint screen under collection tank clogged Check tank alignment and secure with side latches Empty tank Unplug unit. Align two "hooks" into bottom first, then snap into place on top Unplug unit. Remove nozzle and rinse under running water Remove debris from lint screen Please do not return this product to the store. Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. www.bissell.com 800.237.7691 9