Bissell Rewind PowerHelix Rewind SmartClean and Rewind PowerClean User's Guide - Page 9

Maintenance and care Cleaning the inner & outer circular filter continued 4. Separate the outer foam filter and inner pleated circular filter. Wash each individually by hand in warm water. Mild detergent may be used if desired. Rinse well; let filters completely air dry before replacing in filter cup. 5. Wash filter cup in warm water with mild detergent. Completely air dry before reassembling with filters. DO NOT PUT IN DISHWASHER. 6. 6. The upper tank and louvers can be wiped clean with a damp cloth. Reach underneath the upper tank and turn the rim of the louvers to the left to unlock. Pull straight down and remove. Make sure all parts are completely dry before replacing. 7. To replace louvers, position top of louvers inside clear center cavity and turn toward the right to lock tabs into place. Cleaning the pre-motor filter The pre-motor filter protects the motor from debris. 1. Turn power OFF. Unplug vacuum cord Pre-Motor from electrical outlet. Filter 2. The pre-motor filter is located underneath the filter cup in the round center portion of the Lock 'n Seal lever. 3. Remove the small round filter and any debris on top of it. Rinse under warm water; air dry completely before replacing. Replacing the post-motor filter The post-motor filter assists in the filtration process to return clean air to the room. 1. Turn power OFF. Unplug vacuum cord from electrical outlet. Open Door 2. Locate filter behind door on side of vacuum. Remove and replace when filter becomes dirty. The white, pleated filter is NOT washable. Remove Filter www.bissell.com 9 800.237.7691