Bissell Rewind Premier® Pet User Guide - Page 12
Replacing the post-motor filter, Checking rotating floor brush and drive belt
View all Bissell Rewind Premier® Pet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Maintenance and care Replacing the post-motor filter The post-motor filter assists in the filtration process to return clean air to the room. 1. Turn power OFF. Unplug vacuum cord from electrical outlet. 2. Locate filter behind the door on the side of the vacuum. Remove and replace when filter becomes dirty. The white, pleated post-motor filter is not washable. Open Door Remove Filter Checking rotating floor brush and drive belt Check your vacuum's rotating floor brush and drive belt regularly for wear or damage. 1. Turn power OFF. Unplug vacuum cord from electrical outlet. 2. Place handle in low position and turn vacuum cleaner over so bottom side is up. 3. Remove the seven screws with a Phillips head screwdriver. Lift the brush cover off. 4. Grasp rotating floor brush at both ends and lift. 5. Clean strings, hair and other debris from rotating floor brush, paying particular attention to brush ends. 6. Clean strings, hair and other debris from motor pulley and drive belt areas. 7. Check drive belt carefully for wear, cuts or stressed areas. 8. Check air passageway for obstructions. Remove debris from this area. 3. Brush Cover 8. Air Passageway 12 www.bissell.com 800.237.7691