Bissell SpinWave Cordless 2307 User Guide - Page 10
Cleaning Sealed Hard Floors
View all Bissell SpinWave Cordless 2307 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Cleaning Sealed Hard Floors ATTENTION: This machine is designed to be used only on sealed hard floors and should not be used on carpet or rugs. For best cleaning results, sweep or vacuum the floor surface prior to using to avoid scratching or damaging floors from sharp debris. TIP 1: You may feel a slight vibration when turning on the machine if the mop pads are not aligned correctly. Wait a few seconds for the pads to adjust themselves. If this doesn't occur, turn the machine OFF and replace mop pads following the instructions in "Attaching Mop Pads" sections. TIP 2: When you press the ON/OFF button to start the unit the LED lights will illuminate, but the mop pads will not start rotating until the unit is reclined. 1 2 When fully charged, press the ON/OFF button and the three LED lights will illuminate. Recline the body of the unit backward to start the rotating mop pads. TIP 3: For optimum cleaning, perform overlapping cleaning strokes while dispensing cleaning solution. Care should be taken to not overwet the floor surface, especially when cleaning wood and other delicate floor surfaces. TIP 4: When cleaning near baseboards, edges or furniture you may feel a slight pull from the unit due to bouncing off the surface. 10 www.BISSELL.com