Bissell SpinWave Cordless 2315 User Guide

Bissell SpinWave Cordless 2315 Manual

Bissell SpinWave Cordless 2315 manual content summary:

  • Bissell SpinWave Cordless 2315 | User Guide - Page 1
    SPINWAVE® CORDLESS USER GUIDE 2307, 2315 SERIES
  • Bissell SpinWave Cordless 2315 | User Guide - Page 2
    not use for any purpose other than described in this user guide. Use only manufacturer's recommended attachments. » Do not charge with START UNEXPECTEDLY. UNPLUG BEFORE CLEANING OR SERVICING. SAVE THESE INSTRUCTIONS This model is for household use only troubleshooting checks. 2 www.BISSELL.com
  • Bissell SpinWave Cordless 2315 | User Guide - Page 3
    today for years to come, so this guide has tips on using, maintaining, and if there's a problem, troubleshooting. Your cleaner needs a little assembly before Instructions 2 Product View & Assembly . . . 4 Formula 5 Operations 5-11 Maintenance & Care 12-13 Troubleshooting 14 Warranty & Service
  • Bissell SpinWave Cordless 2315 | User Guide - Page 4
    9 Storage Tray 10 Carry Handle 11 Charging Port 2 3 8 4 10 11 9 5 7 6 Assembly WARNING Do not plug in your SpinWave® Cordless until you are familiar with all instructions and operating procedures. click Insert handle into body of unit until you hear a "click". 4 www.BISSELL.com
  • Bissell SpinWave Cordless 2315 | User Guide - Page 5
    Cleaning Formulas WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the hard floor device. Keep plenty of SpinWave® Cordless formulas on hand so you can clean your sealed hard floors whenever it fits
  • Bissell SpinWave Cordless 2315 | User Guide - Page 6
    In Use LED Display WARNING Overcharging may cause battery damage, fire or explosion. Your BISSELL® SpinWave® Cordless machine has an LED light display that will turn on when the power key is pushed to show the battery life status. All LED color is blue. TIP: Be sure to charge unit when there is less
  • Bissell SpinWave Cordless 2315 | User Guide - Page 7
    Attaching Mop Pads: Option 1 Your BISSELL® SpinWave® Cordless may have come with two different mop pads: (2) Soft Touch Pads (2) Scrubby Pads The Soft Touch Pad is for everyday use on delicate flooring like sealed hardwoods and laminate. The Scrubby Pad is used to power through tough, sticky
  • Bissell SpinWave Cordless 2315 | User Guide - Page 8
    Attaching Mop Pads: Option 2 Your BISSELL® SpinWave® Cordless may have come with two different mop pads: The Soft Touch Pad is best for everyday use on delicate flooring like sealed hardwoods and laminate. (2) Soft Touch Pads (2) Scrubby Pads The Scrubby Pad is best used to power through tough,
  • Bissell SpinWave Cordless 2315 | User Guide - Page 9
    Filling Your Clean Water Tank 1 2 3 Clean Water Tank The Clean Water Tank is located on the front of the machine. Lift the Clean Water Tank straight up to remove from the machine. Unscrew the cap from the Clean Water Tank. The Clean Water Tank has two measuring volumes depending on the amount
  • Bissell SpinWave Cordless 2315 | User Guide - Page 10
    aligned correctly. Wait a few seconds for the pads to adjust themselves. If this doesn't occur, turn the machine OFF and replace mop pads following the instructions in "Attaching Mop Pads" sections. TIP 2: When you press the ON/OFF button to start the unit the LED lights will illuminate, but the mop
  • Bissell SpinWave Cordless 2315 | User Guide - Page 11
    Cleaning Sealed Hard Floors (cont'd) 3 4 To clean, push the SPRAY button to dispense solution. 5 Solution will spray out of the nozzle on the front of the foot. You should hear a soft buzzing noise each time you press the SPRAY button to indicate solution being dispensed. For more difficult and
  • Bissell SpinWave Cordless 2315 | User Guide - Page 12
    Cleaning Your SpinWave® Cordless WARNING Do not set the machine on carpet, rug or other fabric surface when mop pad is removed as hook and loop material on foot may damage them. WARNING Do not store machine on wet mop pads as they may damage wood or other delicate floors. 1 2 To remove mop pads,
  • Bissell SpinWave Cordless 2315 | User Guide - Page 13
    and State regulations, removal and proper disposal of lithium-ion batteries is required. For removal of batteries in your SpinWave® Cordless, see instructions on this page. NOTICE: Disconnecting the battery will destroy the appliance and invalidate the warranty. Before proceeding, ensure that: -The
  • Bissell SpinWave Cordless 2315 | User Guide - Page 14
    plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Possible causes Remedies Unit is vibrating/ wobbling installed properly. Machine is standing upright. Turn Power OFF and follow instructions on page 6 for replacing mop pads. Recline machine. Machine is
  • Bissell SpinWave Cordless 2315 | User Guide - Page 15
    which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover service not included in the manual should be performed by an authorized service representative. For any questions or concerns, BISSELL is happy to be of service
  • Bissell SpinWave Cordless 2315 | User Guide - Page 16
    earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We'll contact you with any important product maintenance
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

SPINWAVE
®
CORDLESS
_______________
USER GUIDE
2307, 2315 SERIES