Bissell SpotClean Auto 7786A Quick Start Guide - Page 2

ASSEMBLY 1. Slide flex hose clip into the opening on the front of the machine until you hear a "snap." 2. Snap the hose grip bracket into the back of machine on the clean tank side. Wrap flex hose around unit and snap hose grip into bracket. 3. Attach cord wrap by snapping it into place on the dirty water tank side of the machine. Wrap power cord around cord wrap. QUICK PREP STEPS 1. Unwrap hose and select desired tool. Tool easily snaps onto hose. 2. Remove tank from tool side of unit. Pull on the black tab to remove rubber stopper and reveal tank opening. 3. Your tank is marked for a large stain or a small stain. Based on your cleaning need, fill with hot tap water to the water fill line. Add OXYgen Boost to the OXYgen Boost fill line. Add BISSELL 2X formula to the formula fill line. 4. Replace rubber stopper, then replace the tank on the machine. 5. Twist the quick release cord wrap to release the cord, plug in, and you're ready to spot clean! GUIDELINES TO SPOT CLEAN 1. H old the tool 1 inch above soiled surface and spray trigger to apply cleaning formula. 2. Gently scrub the area with brush on tool. 3. Apply downward pressure to the tool and pull it toward you to suction up the dirt and cleaning formula. Continue until no more dirt can be removed. CLEANING FORMULA ›› A lways use genuine BISSELL portable deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and will void the warranty. BISSELL 2X Portable Machine Spot & Stain Formula and OxyGen Boost Formula For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Care 1-800-237-7691 Monday - Friday 8 am - 10 pm ET Saturday 9 am - 8 pm ET Sunday 10 am - 7 pm ET Or visit the BISSELL website www.bissell.com ©2012 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 160-0585 Rev 10/12