Bissell Steam Mop Deluxe User Guide - English - Page 7

Operation Getting ready continued 2. Fill the water tank A. Remove tank by lifting straight up and away from unit. B. Unscrew cap at bottom of water tank and remove the insert assembly. 2A C. Fill water tank with water. For best results, water should be at room temperature. D. Replace insert assembly and cap, tighten until snug. E. Replace water tank by lining up vertical guides and gently sliding tank into place. 3. Twist the quick release cord wrap clockwise to unwrap the power cord completely and plug into a 120-Volt grounded outlet as described on the Important Safety Instructions, page 3. 4. The ready light will illuminate when the Steam Mop Deluxe is ready for use. Before you clean Thoroughly sweep or vacuum floor prior to cleaning with the Steam Mop Deluxe. Cleaning hard floors Your Steam Mop Deluxe is designed to clean hard flooring such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your Steam Mop Deluxe on waxed or some unwaxed floors may result in a diminished glossiness. The Steam Mop Deluxe is not for use on unsealed wood floors. For best results test in an inconspicuous area or check the care instructions from your flooring manufacturer. 2B 2E www.bissell.com 800.237.7691 7