Bissell Total Floors® Pet Vacuum 61C5W User Guide - Page 15
Replace drive belt
View all Bissell Total Floors® Pet Vacuum 61C5W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Maintenance and Care Replace drive belt 1. Turn the power switch off and unplug the vacuum from the electrical outlet. Remove floor brush following steps 2-4 on page 14. 2. With the rotating floor brush removed from the vacuum cleaner, grasp the old drive belt and remove from the motor pulley. Discard the old drive belt. 3. Place the new drive belt over the motor pulley, pass the belt through the opening of the belt ON/OFF mechanism and loop the belt over the rotating floor brush in the space between the bristles. NOTE: It is important that you use only genuine BISSELL replacement belts. Generic belts many not meet the exact specifications required to keep your vacuum operating at its peak performance. The use of unbranded belts could lead to early failure of the vacuum and could void your warranty. 4. Place ends of the rotating floor brush down into the slots on the sides. Alignment of brush ends is necessary to ensure the brush is fully inserted. 5. Turn the rotating floor brush by hand several times. If properly installed, the drive belt will center itself on the rotating floor brush crown. 6. Place the brush cover back and secure with its screws. 2. 6. rotating floor brush motor pulley w w w. b i s s e l l . c o m 15 800.237.7691