Black & Decker CWV9610 Type 1 Manual - CHV9610 - Page 6

• Figure I - While holding the dust bowl over a wastebasket or sink, pull out the filter to empty I the contents of the bowl. • Figure J - Empty the dust from the bowl and wash if necessary. J • Figure K - The dust bowl can also be washed in warm soapy water. Wash the filter regularly K using warm, soapy water and ensure that it is completely dry before using it again. The cleaner the filter is, the better the product will perform. • Ensure that the dust bowl and filter is dry before re-attaching. • It is very important that the filter is correctly in position before use. IMPORTANT: Maximum dust collection will only be obtained with a clean filter and an empty dust bowl. If dust begins to fall back out of the product after it is switched off, this indicates that the bowl is full and requires emptying. Replacing the filters The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer. Visit www.blackanddecker.com to locate dealers. • Remove the old filters as described above. • Fit the new filters as described above. Maintenance Bowls and filters can be washed thoroughly; however, use only mild soap and a damp cloth to clean the main part of the vacuum. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts. 6